ESP-12H-Kit development board
ESP-12H-Kit is a WiFi development board based on ESP-12h module. It comes with a set of warm and cold lamp beads and RGB colorful lamp beads, which can be used to quickly verify the feasibility of intelligent lamp control products. Its core chip is a highly integrated low-power Wi-Fi system on a chip (SoC), which integrates Wi-Fi MAC, Wi-Fi RF and baseband, RF switch, RF Balun, power amplifier, low noise amplifier and so on.
ESP-12H-Kit supports UART/GPIO/ADC/PWM/12c interface, touch sensor, temperature sensor, pulse counter, etc.
ESP-12H-Kit has industry-leading low power consumption and RF performance, and has a variety of unique hardware security mechanisms. It is specially designed for various applications such as the Internet of Things (loT), mobile devices, wearable electronic devices and smart homes.
Product parameter:
Basic information:
Type of product esp-12h-kit
802.11 b/g/n WiFi development board
Package size:
Package size antenna form DIP-30
25.4 * 48.3 * 14.0 (0.2) mm, net weight 7.0 g onboard PCB antenna/reserved IPEX seat
Working frequency:
Typical value 2400-2483.5MHz
Serial port rate:
Support 110 ~ 4608000 bps, default 115200 bps
Pin interface:
Available 10 ports support 18 interfaces.
UART/GPIO/ADC/PWM/12c, etc
Power supply range:
The power supply voltage is 4.75V ~ 5.25V, and 5.0V is recommended.
safety performance:
WEP/WPA-PSK/WPA2-PSK
working environment:
Operating temperature-40℃ 85℃
Storage environment-40℃ ~ 125℃, < 90% RH
Module certification:
RoHS/REACH
power consumption:
Modem-Sleep 19mA
Light-Sleep 450HA
Deep-Sleep 235HA
Power Off lpA
output rating:
Lln mode HT40, PA 13±2 dBm
LLn mode HT20, PA 13±2 dBm
11g mode, PA 15±2 dBm
Lib mode, PA 18±2dBm
receiving sensitivity:
CCK, 1 Mbps W-97 dBm
CCK, 11 Mbps W- 88 dBm
6Mbps(l/2BPSK) W- 92 dBm
54 Mbps (3/4 64-QAM) W-75 dBm
HT20 (MCS7) W-72 dBm
HT40 (MCS7) W- 69 dBm
Pin definition:
1 IO38 GPIO38/FSPIWP
2 IO37 GPIO37/FSPIQ
3 IO0 GPIOO
4 IO34 GPIO34/FSPICS0
5 IO33 GPIO33/FSPIHD
6 3V3 POWER
7 GND GROUND
8 IO11 GPI011/TOUCH11 /ADC2_CH0/FSPID/FSPIIO5
9 IO12 GPI012/T0UCH12/ADC2_CH1 /FSPICLK/FSPII06
10 NC -
11 IO10 GPI010/TOUCH10/ADC1_CH9/FSPICSO/FSPII04
12 RX U0RXD/GPIO44/CLK_OUT1
13 TX U0TXD/GPIO43/CLK_OUT2
14 GND GROUND
15 3V3 POWER 3.3V
16 NC -
17 IO1 GPI01 /TOUCHI/ADC1_CH0
18 IO2 GPIO2/TOUCH2/ADC1_CH1
19 IO5 GPIO5/TOUCH5/ADC1_CH4
20 IO7 GPIO7/TOUCH7/ADC1_CH6
21 IO8 GPIO8/TOUCH8/ADC1_CH7
22 IO9 GPIO9/TOUCH9/ADC1_CH8/FSPIHD
23 IO20 GPI020/U1 CTS/ADC2_CH9/CLK_OUT1 /USB_D+
24 IO19 GPI019/U1 RTS/ADC2_CH8/CLK_OUT2/USB_D-
25 GND GROUND
26 3V3 POWER 3.3V
27 EN Power enable pin
28 1021 GPI021
29 GND GROUND
30 5V POWER 5V
- Comments(0)
You might like
-
LILYGO T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth$56.89 or 6850 BeansRedeem Now
-
YS-AM100 Bluetooth amplifier board high-power KTV microphone audio integrated machine 2.1 channel TPA3116D2$25.00 or 3000 BeansRedeem Now
-
YS-AS21 Bluetooth digital amplifier board module TPA3251 high and low tone adjustment subwoofer 220W x 2 + 350W$29.99 or 3600 BeansRedeem Now
-
ZK-502L module 5.0 Bluetooth 2*50W digital amplifier board HIFI fever high power 2.0 stereo sound enhancement$3.99 or 480 BeansRedeem Now
-
ZK-HT21 Bluetooth Digital Amplifier Module 2.1 Channel with TDA7498E, Bass/Treble Adjustment, Subwoofer Output$25.00 or 3000 BeansRedeem Now
-
ZK-502MT 2.0 Stereo Bluetooth Audio Digital HIFI Amplifier Board Module with 50W*2 High/Low Tone Adjustment$5.99 or 720 BeansRedeem Now
-
-
PCBWay Wireless Module with SI24R1 RF Communication Wireless Module for Data Transmission$1.99 or 240 BeansRedeem Now
-
-
-
ESP32 WiFi Bluetooth Dual-mode Communication Development Board With Camera$9.99 or 1200 BeansRedeem Now
-
-
-
-
-
-
-
ZK-1002M MINI 2.0 Stereo Bluetooth Digital Amplifier Board Module Multiple Inputs 100W*2$7.99 or 960 BeansRedeem Now