USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working modes, Multi-system Compatible
USB To CAN Adapter Model A
STM32 Chip Solution, Multi-System Compatible, Multiple Working Modes
Features At A Glance
- Supports CAN2.0A (standard frame) and CAN2.0B (extended frame)
- CAN baud rate is configurable in the range of 5Kbps-1Mbps
- Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode
- Supports multiple CAN data sending modes: single frame, multiple frames, manually, regularly and cyclic sending
- Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID, or specify ID to automatically answer the configured data
- Data can be saved as TXT or Excel
- Supports CAN bus detection for status checking
- Sending/receiving CAN data with time scale, allows sequentially displaying
- Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default)
- Supports setting working parameters by configuration software or serial command, can be saved after power off
- Adopts STM32 chip solution, stable and reliable communication
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit
- Comes with master computer software for Windows system, easy to use
- Easy secondary development, just need to modify the sending and receiving commands
Version Upgrade
Primary Functions
Collects Data From CAN Bus To PC Via USB For Transceiver Control, Data Analysis,
Acquisition And Monitoring Of CAN Bus Network
CAN Baud Rate Configurable
CAN Baud Rate Is Configurable In The Range Of 5Kbps-1Mbps
Support Windows And Linux System
Support Windows XP/7/8/10/11 And Linux Systems Such As Raspberry Pi OS And Ubuntu Under Jetson Nano, Support Secondary Development
Support Multiple Working Modes
Adopts STM32 Chip Solution
Adopts The Original STM32F103 Chip, Stable And Reliable Communication
Interfaces Introduction
Product Show
Outline Dimensions
Shipping list:
- USB-CAN-A x1
- USB Cable ~1.5m x1
- Screwdriver x1
1
2
3
- Comments(0)
You might like
-
Industrial USB TO RS485 Bidirectional Converter, Onboard original CH343G, Multi-Protection Circuits$7.99 or 960 BeansRedeem Now
-
CH343G USB TO RS232/485/TTL Interface Converter, Industrial Isolation$18.99 or 2280 BeansRedeem Now
-
FT232RL USB TO RS232/485/TTL Interface Converter, Industrial Isolation$22.99 or 2760 BeansRedeem Now
-
Industrial USB TO TTL (C) 6pin Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Hardware Flow Control$7.99 or 960 BeansRedeem Now
-
Industrial USB TO 4CH TTL Converter, USB To UART, Multi Protection & Systems Support$13.99 or 1680 BeansRedeem Now
-
-
European Standard Adapter Power Conversion Plug(Supports a maximum power of 300W)$0.50 or 60 BeansRedeem Now
-
-
-
-
-
-
-
-
Industrial USB TO TTL Converter, Original FT232RNL, Multi Protection & Systems Support$6.99 or 840 BeansRedeem Now
-
-
-