Dear all,
I would like to know what are PCBWay's capabilities for z-axis milling.
I would like to mill a small pocket (5x1.5mm) into a 1mm thick PCB. The depth should be 380um.
Is this possible?
What would be the specification on the milling depth (example: 380+-10um)?
How should I show the milled socket in the Gerber file?
Thanks in advance and best regards,
Matthias
Ranking | Name | Answers |
---|---|---|
1 | PCBWay Team | 3 |
2 | Tinny xn | 1 |