MCU_Board_A_v1.0.2b0

The different in quality of the assembled board, that I experienced was actually the bond of the copper trace and also solder pad to the board FR-4 material are quite strong. Many times in my experience during prototyping a board, we need to replace some components, for example resistor that we want to try several values. Then obviously we may need to desolder it. With this board, I was desoldering 0603 SMD resistor then solder a replacement resistor on same location several times, because I need to test several Ohm value. It was quite easy and I don't messed up the pad and trace near the component location. My past experience with different manufacturer was either the copper trace or the solder pad was pulled out from the FR-4 material. But it didn't happen on this case, that proving the quality of the board by pcbway is okay and quite reliable.

Apr 08,2022
47 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Petugas TPA View Profile
32posts 1followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Unfortunately, there was a misunderstanding when checking the component placement. I had understood the marking of the LED with plus and minus differently, namely anode = plus and cathode = minus. ...
    Custom onewheel pint x battery box. Excellent print and material build. Great customer service. Exact fitment for project. Will use for future projects
    Properly manufactured and good quality PCB, all the component placement was okay and properly soldered.
    Very impressed with the build quality. The fasteners fit like a glove into the threads and countersinks. The plate is even smoother than I expected. It does have visible milling marks (as expected)...
    Great quality & fast delivery
    Quantity 5 fairly simple 2 layer PCBAs, largely surface mount. Designed to take an ESP32 Pico Dev Kit attachment and used for test fixturing. PCBWay did a great job on these boards. During the proc...
    This is a replacement mainplate for the extruder in the Prusa Mk3.9/Mk4 printers, this item has been shown to wear with extensive filament changes. So I wanted a version that would not be as liable to...
    First time ordering av PCB and it turned out really good. It's an adater to adapt a PS2 mouse to old Amiga's, C64, C128 computer from the 80's. And it's also can adapt the old 8 bit NES controller to ...
    SHOW ME MORE