HackVlog Hugatry
FINLAND • + Follow
Edit Project
Components
|
MCP1700 series regulator, SOT23 package |
x 1 | |
|
LM78xx series regulator |
x 1 |
Description
Protoboard with MCP1700/LM78xx regulator
I designed a prototyping board / perfboard that includes some of the components I've found myself using quite often. That includes DC-jack, either MCP1700 series SOT23 regulator or LM78xx-series regulator and one SO8 package footprint for misc SMD IC.
Two columns next to the regulators are for VCC (regulator output) and ground. These columns have been labeled in the front layer silkscreen. The VCC pads are connected only on one side of the board, making it easier to cut a trace to divide the column in two or more sections.
Below is a video of designing this kind of prototyping boards in KiCad:
May 29,2023
462 views
Protoboard with MCP1700/LM78xx regulator
2 Layers PCB 50 x 70 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
Custom design for prototyping board, including option for either MCP1700 or LM78xx series regulator.
462
1
0
Published: May 29,2023
Download Gerber file 4
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(1)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
- Engineer Feb 14,2024
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by HackVlog Hugatry
- CH551G Prototyping Board W/USB-C What?This is handy development board with CH551G, USB-C jack and all the required extra components. ...
- ATTiny85 Foot Pedal Controller What?This is simple test circuit for reading the position of old sewing machine foot pedal (low volt...
- DIY 2S Lithium Battery Protection Module Important to know, if you order this boardBottom layer doesn't have any exposed copper. There are no...
- CH551G Based AVR ISP Programmer Simple AVR ISP programmerMy first AVR programmer was just a parallel port cable with few resistors. ...
- VGT6250 Ultrasonic Cleaner Replacement Timer WARNING!This PCB is powered from 5V that comes from the power management board inside the ultrasonic...
- Microphone preamp with filtered power supply No pick&place file / BOMDifferent microphones, sound cards, power supplies have differen specifi...
- Radius Gauge (1-15mm) No need for components or soldering. Just order the PCBs and you'll have radius gauge similar to one...
- Protoboard with MCP1700/LM78xx regulator I designed a prototyping board / perfboard that includes some of the components I've found myself us...
You may also like
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
338 0 2 -
Naruto Multi-color PCB printed with UV technology
135 2 1 -
-
-
-
-